بخشی از مقالات علمی پژوهشی و کنفرانس

48-A Basti, H khanipoor, Investigation of the incremental tube forming process and the influence of the vital process parameters on the quality of final product, 17 (7), pp 295-306 (2017)

47-SM Mirfalah-Nasiri, A Basti, R Hashemi, A Darvizeh, The effective investigation of the general stress state on the forming limit of the anisotropic aluminum sheet by using extended M-K model, , Modares Mechanical Engineering, 17 (11), pp 192-198 (2017)

46-SM Mirfalah-Nasiri, A Basti, R Hashemi, Forming limit curves analysis of aluminum alloy considering the through-thickness normal stress, anisotropic yield functions and strain rate, International Journal of Mechanical Sciences 117, pp 93-101, (2016)

45- A Mehrvar, A Basti, A Jamali, Optimization of electrochemical machining process parameters: Combining response surface methodology and differential evolution algorithm, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, (2016).

44- M Zaeimi, A Basti, M Alitavoli, Effect of Martensite Volume Fraction on Forming Limit Diagrams of Dual-Phase Steel, Journal of Materials Engineering and Performance 24 (5), 1781-1789, (2015).

43-NSM Mirfalah, A BastiI, R Hashemi, Numerical Analysis of the Effect of Advanced Yield Criterion on Prediction of Strains and Stresses in Anisotropic Aluminum Sheet, , Modares Mechanical Engineering, 15 (8), pp 393-401, (2015)

42-M Saradar, A Basti, M Zaeimi, Numerical study of the effect of strain rate on damage prediction by dynamic forming limit diagram in high velocity sheet metal forming, Modares Mechanical Engineering 14 (16), (2015)

41- E Mahmoudinezhad, R Ansari, A Basti, M Hemmatnezhad, An accurate spring-mass finite element model for vibration analysis of single-walled carbon nanotubes, Computational Materials Science 85, 121-126, (2014)
.
40- A Basti, S Sojodi, S Esmaeili, M Alitavoli, DEVELOPMENT OF A PREDICTIVE FINITE ELEMENT MODEL FOR INVESTIGATION OF PHASES BEHAVIOR AFTER COLD ROLLING PROCESS, International Journal of Engineering-Transactions C: Aspects 27 (3), 425, (2013)

39- B Hoseinpour, N Amanifard, A Basti, Simulation of Cold Rolling Process Using Smoothed Particle Hydrodynamics (SPH), International Journal of Engineering-Transactions B: Applications 26 (5), 515, (2012)

38- E Mahmoudinezhad, R Ansari, A Basti, M Hemmatnezhad, An accurate spring-mass model for predicting mechanical properties of single-walled carbon nanotubes, Computational Materials Science 62, 6-11, (2012)

37- AR Mojdehi, A Darvizeh, A Basti, Nonlinear Dynamic Analysis of Three-Dimensional Elasto-Plastic Solids by the Meshless Local Petrov-Galerkin(MLPG) Method, Computers, Materials, & Continua 29 (1), 15-39, (2012)
.
36- S Mohamadnejad, A Darvizeh, M Darvizeh, R Ansari, A Basti, Crack Analysis, Using a New Coupled FE-EFG Method, Journal of Aerospace Science & Technology 9 (1), (2012)

35- Ali Basti, Sareh Esmaeili, Soheila Sojodi and Majid Alitavoli, Determination of the Residual Stress in the Machined Layer of Multi Phase Alloys by Considering the Prior Cold Rolling Process, Steel research international, will be appear.

34- مجتبي صادقي،علي باستي ، مجید علي طاولي، طراحی بهینه فرآیند هیدروفرمینگ برای تولید قطعات مخروطی شکل با استفاده از روش تاگوچی و المان محدود، پنجمین کنفرانس شکلدهی فلزات و مواد ایرانMATFORM’90 ، دانشگاه صنعتی شریف، مهرماه 1390

33- ساره اسماعیلی ، علی باستی ، مجید علی طاولی، فرمولبندی و شبیه سازی اجساءمحدود فرایند نورد سرد ورق برای آلیاژهای دو فازی، پنجمین کنفرانس شکلدهی فلزات و مواد ایرانMATFORM’90 ، دانشگاه صنعتی شریف، مهرماه 1390

32- ساره اسماعیلی ، علی باستی ، مجید علی طاولی، بررسی اثر نحوه چیدمان فازها در فرآیند شکل دهی فلسات، بر روی فرآیند ماشینکاری، به روش اجزای محدود، پنجمین کنفرانس شکلدهی فلزات و مواد ایرانMATFORM’90 ، دانشگاه صنعتی شریف، مهرماه 1390

31- امین خلیلی راد، علی باستی ، سید رضا مطلبی، طراحی بهینه فرآیند شکلدهی مجدد لوله برای تولید لوله های مستطیل شکل بر اساس روش-های تاگوچی و اجزای محدود، پنجمین کنفرانس شکلدهی فلزات و مواد ایرانMATFORM’90 ، دانشگاه صنعتی شریف، مهرماه 1390

30- علی باستی، سامان یاسري، مطالعه ي اجزاي محدود و تجربی کرنش ها در قطعات شکل یافته توسط فرآیند شکلدهی پره اي، پنجمین کنفرانس شکلدهی فلزات و مواد
ایرانMATFORM’90 ، دانشگاه صنعتی شریف، مهرماه 1390.

29- A.Basti, M.Sadeghi, M.Bakhshi-Jooybari and H.Gorji, Optimization Design of Hydroforming Process for Conical Cup Using Taguchi and Finite Element Method, 3rd International and 12th National Conference on Manufacturing Engineering, ICME2011, Tehran, Iran, (2011)

28- A.Basti , A.Darvizeh and M.Bolooghi, Numerical Analysis of the Single Point Incremental Forming Process, 3rd International and 12th National Conference on Manufacturing Engineering, ICME2011, Tehran, Iran, (2011)

27- A.Basti, A.Khalili Rad, S.R.Motallebi, Optimized Design of Cold Roll Forming Process for Production of Rectangular Pipe Based on the Taguchi and Finite Element Method, 3rd International and 12th National Conference on Manufacturing Engineering, ICME2011, Tehran, Iran, (2011)

26- N. Anjami and A. Basti, Research on Orbital Forging Process by Using 3D Finite Element Method, Proceeding of the 10th International Conference on Technology of Plasticity, Aachen, Germany, pp 224-229, (2011).

25- A. Basti, A. Khorasani and A.R. Nateghi, Analysis and Comparison of Micro Scale and Bulk Scale of Deep Drawing Process, , Proceeding of the 10th International Conference on Technology of Plasticity, Aachen, Germany, pp 1081-1086, (2011).

24-A. Basti and S. Yaseri, A Finite Element Study on Paddle Sheet Forming Process for Production of Axisymmetric Parts, , Proceeding of the 10th International Conference on Technology of Plasticity, Aachen, Germany, pp 1136-1141, (2011)

23- A. Rezaei Mojdehi, A. Darvizeh and A. Basti, Application of Meshless Local Petrov-Galerkin (MLPG) Method to Three Dimensional Elasto-Plastic Problems based on Deformation Theory of Plasticity, Journal of Computer Modeling in Engineering & Sciences, Accepted for publishing
.
22- A. Rezaei Mojdehi, A. Darvizeh, A. Basti, Three dimensional static and dynamic analysis of thick plates by the meshless local Petrov-Galerkin (MLPG) method under different loading conditions, Journal of Comp. Meth. Civil Eng., 2, pp 65-81 (2011).

21- A. Rezaei Mojdehi, A. Darvizeh, A. Basti, H. Rajabi, Three dimensional static and dynamic analysis of thick functionally graded plates by the meshless local Petrov–Galerkin (MLPG) method, Engineering Analysis with Boundary Elements, Volume 35, Issue 11, pp 1168-1180, Nov. (2011).

20- A. Rezaei Mojdehi and A. Basti, Elasto-plastic Analysis of Cantilever Beams, By The Meshless Local Petrov-Galerkin (MLPG) Method, 18th Annual International Conference on Mechanical Engineering-ISME2010, Sharif University of Technology, Tehran, Iran, May (2010)

19- A. Rezaei Mojdehi, A. Basti and H. Rajabi, Three Dimensional Elasto-dynamic Analysis of Thick Plates by the Meshless Local Petrov-Galerkin Method, 18th Annual International Conference on Mechanical Engineering-ISME2010, Sharif University of Technology, Tehran, Iran, May (2010).

18- Nassir Anjami and Ali Basti, Investigation of rolls size effects on hot ring rolling process by coupledthermo-mechanical 3D-FEA, Journal of Materials Processing Technology, 210 , pp 1364–1377, (2010).

17- علی باستی، امین خلیلی راد و محمد جلالی سندی، بررسی اثرات پارامترهای فرايند نورد گرم در محصول نهايی به روش اجزای محدود، دهمين کنفرانس ملی مهندسی ساخت و توليد، دانشگاه صنعتی نوشيروانی بابل، 1388.

16- علی باستی و سامان یاسری، تحلیل فرآیند تشکیل براده برای برنج دارای سرب به روش اجزای محدود، دهمين کنفرانس ملی مهندسی ساخت و توليد، دانشگاه صنعتی نوشيروانی بابل، 1388.

15- Nassir Anjami and Ali Basti, A Comparison Between Isothermal And Coupled Thermo-Mechanical FE Analysis Of The Ring Rolling Process, Journal of Advanced Materials Research Vols. 264-265, pp 235-240, (2011).

14- Nassir Anjami and Ali Basti, Investigation On Constant And Variable Feed Speeds Effects In Ring Rolling Process Using 3D FEM, Journal of Advanced Materials Research Vols. 264-265 , pp 235-240, (2011).

13- Nassir Anjami and Ali Basti, Research on Effect of feed speed on Vertical Ring Rolling Process By Coupled Thermo Mechanical 3D FEA, Advances in materials and processing Technologies 2009 ,Malaysia.

12- نصیر انجامی و علی باستی،تحلیل سه بعدی فرآیند نورد حلقه به روش اجزاء محدود، چهارمین کنفرانس شکل دهی فلزات و مواد ایران، دانشگاه صنعتی شریف، مهر 1387.

11- Jun Shinozuka, Ali Basti and Toshiyuki Obikawa, Development of Thin Film Thermocouple Sensor Tool for Measuring High Temperature Fields in Metal Cutting Processes, Journal of Manufacturing Science and Engineering, Transactions of the ASME, pp 130-238, (2008).

10- Ali Basti, Toshiyuki Obikawa and Jun Shinozuka, Tools with Built-in Thin Film Thermocouple Sensors for Monitoring Cutting Temperature, International Journal of Machine Tools & Manufacture 47, pp. 793-8 (2007).

9- Finite Difference Modeling of Cutting Temperature in Machining of A6061-T6 Aluminum Alloy at Ultra High Cutting Speeds, Toshiyuki Obikawa, Ali Basti and Jun Shinozuka, Will appear in Key Engineering Materials, Advances in Abrasive Technology IX, Vol. 329, pp. 681-6, (2007).

8- Measurement of Temperature Distribution on the Tool Rake Face with a Cutting Tool with Built-in Thin Film Thermocouples, Jun Shinozuka, Koji Utsumi, Ali Basti and Toshiyuki Obikawa, Transaction of the Japan Society of Mechanical Engineers, Issues C, Vol. 72, No. 717, pp.1687-1694 (2006).

7- Tools with Built-in Thin Film Thermocouple Sensors for Monitoring Cutting Temperature, Ali Basti, Toshiyuki Obikawa and Jun Shinozuka, Tehran International Congress on Manufacturing Engineering, (TICME2005).

6- Measurement of Cutting Temperature Distribution on Tool Rake Face by the Tool Insert with Built-in Thin Film Thermocouples, Jun Shinozuka, Koji Utsumi, Ali Basti and Toshiuki Obikawa, 2005 Conference of The Japan Society for Precision Engineering, pp. 607-8 (2005), (In Japanese).

5- Development of Intelligent Cutting Tool with Built-in Thin Film Thermocouples, Jun Shinozuka, Koji Utsumi, Ali Basti and Toshiyuki Obikawa, The 5th Manufacturing and Machine Tool Conference pp. 251-2(2004), (In Japanese).

4-Elasto-Visco-plastic Finite Element Formulation and its usage in Machining Process, Reza Naghdabadi, Javad Akbari and Ali Basti, Proc. 7th Annual Conf. Mechanical Engg, Zahedan, Iran, pp. 893-900 (1999), (In Persian).

3- Study on Machining Variable Effects in Orthogonal Cutting by FEM and Comparison with Experimental Results, Reza Naghdabadi, Javad Akbari and Ali Basti, Proc. 4th Conf. Of Manufacturing Engg, Tehran, 106-113, (1999), (In Persian).

2-Analysis of Orthogonal Cutting Using FEM, RezaNaghdabadi, Javad Akbari and Ali Basti,Proc. 6th Annual and 3rd Int. Conf. Mechanical Engineering, Tehran, pp. 1461-1469, (1998), (In Persian)
.
1-Orthogonal Cutting Analysis using Finite Element Method, Reza Naghdabadi, Javad Akbari and Ali Basti, Journal of Iranian Mechanical Engineering, Vol. 1., No. 2, pp. 39-46, (1998), (In Persian)